Using Windows Network Troubleshooter: Windows 11 Next Steps

If Wi‑Fi or Ethernet suddenly stops, Windows Network Troubleshooter is a smart first move. This article shows where to open it in Windows 11 and 10, what the results mean, and which checks to try next if Windows finds nothing.

Share
Windows laptop

If your Wi‑Fi or Ethernet just stopped working, the Windows Network Troubleshooter is a good first check. It looks for common connection problems and tries a few built-in fixes. It can also tell you whether to keep working on the PC, the DNS settings, or the router. Use it before deeper changes when the issue is new, unclear, or looks like a basic connection failure rather than a known driver or hardware problem.

When to use it first

Use the troubleshooter early when the symptom is broad. That includes no internet, limited connectivity, or a network that worked a minute ago and then stopped. It’s most useful when you want Windows to tell you what it can see before you start changing settings.

A decision table helps here:

What you’re seeingUse the troubleshooter?Why
This PC lost internet, but the rest of the network is unclearYesIt can check the local adapter and basic connectivity first.
Only one app or one website failsMaybe laterThat can be a DNS, browser, or service issue instead of a general network fault.
Every device in the house is offlineNot firstThe router, modem, or ISP is the more likely problem.
You already know the cable is bad or Wi‑Fi is offNoA specific fix is faster than a general scan.

Rerunning it usually won’t help if nothing has changed since the last run. If the same router, same adapter, and same settings are still in place, Windows is likely to report the same thing again.

Open it in Windows 11 or Windows 10

In Windows 11, go to Settings > System > Troubleshoot > Other troubleshooters, then find Internet Connections and select Run. Microsoft’s dialog may then ask you to choose the connection problem it should check.

In Windows 10, use Settings > Update & Security > Troubleshoot > Additional troubleshooters > Internet Connections. If you prefer Control Panel, you can also go through Control Panel > Network and Internet > Network and Sharing Center > Troubleshoot problems, then pick the network option shown there.

  1. Open the Settings app.
  2. Go to the network troubleshooter page for your version of Windows.
  3. Choose Internet Connections.
  4. Select Run and answer any prompt that matches the problem you’re seeing.

The exact labels can vary a little by Windows build, but the goal is the same. Start the built-in internet connection troubleshooter from Windows itself, not from your browser.

A Windows laptop is open to settings on a desk.

What happens while it runs

Once you start it, Windows runs a short set of built-in diagnostics. On Windows 11, that can end with a prompt that gives you two choices. For a network problem, you’d usually pick Troubleshoot my connection to the internet.

During the check, Windows may inspect the adapter, test basic connectivity, and ask a simple follow-up question if it needs more context. That part feels quick when the problem is obvious, and a little vague when the failure is intermittent. If the tool offers to apply a repair, read the prompt first. That way you know whether it will briefly interrupt the connection.

The useful thing here is not how fast it finishes. It’s whether Windows can separate a local PC problem from something outside the machine.

How to read the result

The wording matters more than the little spinner that runs before it.

  • Fixed means Windows found something it could change and did so. That can be enough if the issue was a stuck adapter, a simple settings problem, or something similar. It does not guarantee the connection will stay healthy.
  • No problems found means Windows did not see an obvious fault in the adapter or basic settings. That still leaves a router issue, an ISP issue, or a problem that comes and goes before the scan catches it.
  • Couldn’t identify the problem means the symptoms did not match one of the built-in checks. In practice, that often points to intermittent Wi‑Fi, DNS trouble, or a router fault the PC can’t prove by itself.
  • Couldn’t fix the problem means Windows saw something off but did not repair it.

If the message names a category, use that clue. Adapter trouble points back to the PC. DNS points to name resolution. Router or internet problems point outside the PC. The exact message varies, but the category usually tells you where to look next.

What to do next if it still isn’t working

If the troubleshooter does not fix the issue, move to the most likely cause instead of running it over and over.

  1. Check the adapter.

Confirm that Wi‑Fi or Ethernet is actually enabled. If it looks stuck, disable and re-enable the adapter. If the problem started after a driver or Windows update, that makes the adapter path more suspicious.

  1. Decide whether the problem follows the PC.

Try another network if you can, or test another device on the same network. If only this PC fails, the issue is probably on the machine. If other devices also fail, the router or ISP is more likely.

  1. Match the next check to the symptom.
  • Wi‑Fi: check signal strength, airplane mode, saved network settings, and whether other devices on the same Wi‑Fi are also having trouble.
  • Ethernet: check the cable, the port, and the link lights, then try a different cable or port if one is available.
  • DNS: if some sites work and others do not, try another DNS server or compare one site that loads with one that does not.
  • Adapter: update or roll back the network driver if the trouble began after a driver change.
  • Router: restart the router and modem, then wait for the connection to come back fully before testing again.

If the PC still has no usable connection after those checks, a network reset may be the next broader step. Save that for later, because it clears saved network state and forces you to reconnect.

Stop using the troubleshooter as the main tool once it can’t see a local problem, or once the same result keeps returning after nothing on the machine has changed.

Frequently Asked Questions

Should I run the Network Troubleshooter before restarting the router?

Yes, usually if the problem seems limited to your PC and you want Windows to check the local connection first. If every device is offline, or the router itself looks down, checking the router is the faster move.

When should I use Network Reset instead?

Use Network Reset after the troubleshooter and simple adapter checks have failed. It fits best when the problem looks tied to Windows settings rather than a bad cable or a dead router. It is broader, so treat it as a later step.

Sources